Maintenance forecast

Which machine needs maintenance in the next 30 days, and why

Nisthora watches your machines' sensor values. When they stop looking normal, it tells you which machine needs maintenance, roughly how many days you have, and what in the readings is driving it. You plan the stop before the breakdown plans it for you.

Machine Health page listing open warnings such as a press needing maintenance in about 5 days
How it works

From sensor values to a planned stop.

  1. Watch

    Nisthora reads every sensor on every machine, all day, through Nisthora Edge.

  2. Spot

    Anomaly detection flags readings that are not normal for that machine.

  3. Forecast

    Every night, predictive analysis looks for wear trends and estimates how many days are left, up to 30 days ahead.

  4. Plan

    You plan the maintenance stop at a good time, such as between batches, instead of losing a shift to a breakdown.

The maintenance notice

A clear message, not a chart to decode.

For each machine at risk, Nisthora shows about how many days are left, with a range, and the reasons, written in plain words from the readings that drove the forecast.

  • Within 7 days: needs attention now. Plan the stop.
  • Within 30 days: plan it soon, at a time that suits production.
  • No sign of wear: nothing to do. Keep running.

It learns from about 90 days of each machine running; until then it says "Learning". The reasons matter. "Motor current rising" sends the right engineer with the right spare part, instead of a general inspection.

Press 04 · Line 2Plan maintenance

Needs maintenance in about

12 days (8 to 19)

Why

  • Main motor current is rising by 0.6 A a day for its speed
  • At this rate it leaves its normal range in about 12 days
Illustration of a maintenance notice. Within 7 days is shown as needs attention now; within 30 days as soon.
Why plan, not wait

Planned maintenance beats a breakdown.

BreakdownPlanned maintenance
When it happensWhenever the machine fails, often mid-batch or on the night shiftWhen you choose, such as between batches or in a planned break
Effect on productionUnplanned downtime, lost output, scrap from the interrupted batchA planned stop, kept apart from breakdowns in your downtime figures
Spare parts and peopleFound in a hurryReady, because you know what the readings point to
What Nisthora showsThe stop, its reason and its length in the downtime logThe notice beforehand, and the readings back to normal afterwards
Clear about our role

Nisthora tells you what, why and by when.

Your maintenance team does the work in its own way, with its own tools. Nisthora's job is to tell them which machine, what the readings show, and how soon, then confirm the readings are back to normal afterwards.

See Nisthora on your own machines.

Book a demo. We will show you live data and talk through your machines, lines and shifts.